Skip to content

Careers

Come work with us at Woodruff Engineering Inc!

Open Positions

We’re growing our team in Santa Fe, New Mexico. Woodruff Engineering designs and builds custom electromagnets, high-voltage power supplies and pulsed power systems for fusion energy, quantum computing, defense and scientific research. Our team is small, so everyone works on real hardware from design through build, test and delivery.

To apply, email your CV and a cover letter to simon@woodruffeng.com, with the position title in the subject line. Pay is competitive and depends on experience.

Mechanical Technician – Magnet Winding & Construction

Full-time · On-site, Santa Fe, NM

Build the custom magnets we make for our customers, from small precision coils to large water-cooled and pulsed magnets. You will work closely with our lead magnet and mechanical technicians.

What you’ll do

  • Wind coils from copper magnet wire, hollow conductor and strip on our winding equipment
  • Make and fit insulation, formers, clamps and support structures
  • Vacuum impregnate and pot coils with epoxy
  • Machine, cut, drill and assemble metal and composite parts
  • Assemble Helmholtz pairs, solenoids, coil arrays and large magnets
  • Test finished magnets for resistance, inductance, insulation and field, and keep build records

What we’re looking for

  • Hands-on experience in mechanical assembly, fabrication or a skilled trade
  • Comfortable reading engineering drawings and working to tolerances
  • Experience with hand tools, power tools and basic machine tools
  • Careful, methodical work habits and attention to detail
  • Able to lift and handle heavy parts safely

Nice to have

  • Coil winding, motor rewinding or transformer manufacturing experience
  • Epoxy, vacuum impregnation or composite work
  • Manual mill and lathe skills
  • Brazing or TIG welding

Electrical Technician – Power Electronics & Pulsed Power

Full-time · On-site, Santa Fe, NM

Build and test the electrical systems we make, including DC and pulsed power supplies, capacitor banks, coil drivers and their control and interlock circuits.

What you’ll do

  • Wire and assemble power supplies, capacitor banks, switch assemblies and control cabinets
  • Build and solder PCBs, harnesses and high-current bus work
  • Assemble high-voltage components such as capacitors, thyristors, IGBTs, spark gaps and resistors
  • Build safety interlocks, dump circuits and grounding systems
  • Commission and test systems using oscilloscopes, HV probes and Rogowski coils
  • Troubleshoot faults and document builds and test results

What we’re looking for

  • Experience in electrical or electronics assembly, wiring or test
  • Able to read schematics and wiring diagrams
  • Good soldering, crimping and cable-making skills
  • Familiar with multimeters, oscilloscopes and power supplies
  • A strong respect for electrical safety

Nice to have

  • Experience with high-voltage or high-current equipment
  • Power electronics, motor drives or industrial controls experience
  • Associate degree or certificate in electronics, or military electronics training
  • PLC or microcontroller experience

Electrical Engineer – High-Voltage Pulsed Power

Full-time · On-site, Santa Fe, NM

Lead the electrical design of our pulsed power and high-voltage systems, from first concept through build and test, and help customers turn their requirements into hardware that works.

What you’ll do

  • Design capacitor banks, pulse-forming networks, modulators and HV power supplies
  • Choose and size switches, capacitors, transmission lines and protection
  • Model circuits in SPICE and electromagnetic tools such as COMSOL
  • Design insulation, grounding, shielding and safety systems
  • Write design reports, specifications and drawings for customers
  • Support technicians during build, and lead commissioning and test
  • Help scope technical work and prepare quotes

What we’re looking for

  • MS or PhD in electrical engineering, physics or a related field, with a focus on high-voltage pulsed power
  • Hands-on experience designing and testing pulsed power hardware
  • Good working knowledge of HV insulation, switching, energy storage and pulsed diagnostics
  • Clear technical writing and comfortable working with customers
  • Must be a U.S. person as defined by US export control regulations (e.g. a U.S. citizen or lawful permanent resident)

Nice to have

  • Experience with fusion, accelerator, directed-energy or plasma research systems
  • Magnet or coil-driver design experience
  • Experience at a national laboratory or in defense research
  • Knowledge of US export control regulations

Pulsed Power Consultants

Contract · Santa Fe, NM preferred

We work with experienced consultants on pulsed power and high-voltage projects. If you have deep pulsed power experience and are open to contract work, we would like to hear from you. Consultants based in or near Santa Fe are preferred, as many projects include time in our lab.

Areas of interest

  • Capacitor banks, pulse-forming networks and Marx generators
  • High-voltage switching (spark gaps, thyristors, solid-state switches)
  • HV insulation, breakdown and electrical safety
  • Pulsed power diagnostics and measurement
  • Design reviews and independent technical assessments

Because much of this work is subject to US export control regulations, consultants must be U.S. persons (e.g. U.S. citizens or lawful permanent residents). To express interest, email your CV and a cover letter to simon@woodruffeng.com describing your areas of expertise, your location and how you prefer to work.

Woodruff Engineering is an equal opportunity employer.

Internships in Mechanical & Electrical Engineering

Woodruff Engineering offers paid internships for students interested in mechanical and electrical engineering. Interns work alongside our engineers and technicians in our Santa Fe workshop on real customer projects, helping to design, build and test custom magnets and pulsed power systems for fusion, research and industry.

What you could be involved in

  • Mechanical design, CAD and drawings
  • Coil winding, fabrication and assembly
  • Electrical wiring, power electronics builds and testing
  • Magnetic field and electrical measurements

Santa Fe Community College students: apply through PILAS

We recruit interns through Santa Fe Community College’s PILAS paid internship program. To apply, visit the PILAS program page and contact Miguel Maestras at SFCC, letting him know you’re interested in an engineering internship with Woodruff Engineering.

Internships for UNM School of Engineering Students

We also host interns through the University of New Mexico School of Engineering internship programs, run by the Engineering Student Success Center. These are paid internships for engineering, computer science and construction management students.

  • SPSP internships: a state-funded program in which UNM covers most of the intern’s stipend. Interns commit to 12 weeks at 12–15 hours per week, and must meet the program’s eligibility requirements.
  • School of Engineering CD internships: an internally funded program that is also open to sophomores and international students.
  • Placements are available from the start of the fall semester through the end of the spring semester, while places last.

UNM students: how to apply

Contact the Internship & Job Placement Coordinator at the UNM School of Engineering Student Success Center (esscareers@unm.edu) and ask to be put forward for an internship with Woodruff Engineering. The coordinator will share your resumé with us, and we may get in touch with you directly.

We do not accept applications or candidate submissions from recruitment agencies.